Installation d'un autoradio Android pour Mercedes W204 : guide en 14 étapes NTG4.5 pour 2011–2014
Installation de l'unité principale Android Mercedes W204 pour la Classe C 2011–2014 NTG4.5
Le présent Installation de l'unité principale Android Mercedes W204 le guide couvre les Route Mercedes-Benz Classe C W204 / S204 / C204 2011–2014 utilisant le système de style NTG4.5. L'installation terminée montrée ci-dessus vous donne d'abord le résultat final du tableau de bord, suivi de la procédure complète en 14 étapes couvrant le démontage des garnitures, l'accès à l'unité principale d'origine, les connexions d'alimentation et LVDS, le montage de l'écran Android, le passage des câbles et le test final des fonctions.
Installation de l'unité principale Android Mercedes W204 : quelles années ce guide couvre-t-il ?
Les tableaux de bord W204 des années de production proches peuvent sembler similaires, mais le système d'infodivertissement d'origine et la route de câblage requise ne sont pas toujours les mêmes. Vérifiez la limite d'année avant de suivre l'installation.
Installation de l'unité principale Android Mercedes W204 : réponses rapides avant de commencer
Ce sont les questions pratiques qui doivent être résolues avant de commencer le démontage du tableau de bord.
Ce guide d'installation est-il adapté à une Mercedes W204 2011 ?
Oui, lorsque le véhicule suit la route Classe C 2011–2014 NTG4.5 correspondante. La même procédure couvre la configuration W204 / S204 / C204 prise en charge préparée pour ce produit.
Ce guide couvre-t-il également une W204 2008–2010 ?
Non. Les véhicules plus anciens utilisent la route produit NTG4.0. N'échangez pas les hypothèses d'alimentation, LVDS ou d'installation entre NTG4.0 et NTG4.5.
L'installation d'un écran Android W204 nécessite-t-elle de couper des fils ?
La route iKAGOO prévue utilise un faisceau adapté sans couper intentionnellement le câblage d'origine pris en charge. Le démontage du tableau de bord, les adaptateurs, le passage des câbles et la configuration finale restent nécessaires.
Pourquoi le nouvel écran Android peut-il s'allumer mais ne produire aucun son ?
L'alimentation et l'audio utilisent des routes séparées. L'audio Mercedes peut dépendre de l'AUX, de l'AMI, de l'USB, d'un amplificateur ou d'un équipement à fibre optique. Un démarrage réussi de l'écran ne prouve pas que le chemin audio est complet.
Que faut-il tester avant de refermer le tableau de bord ?
Testez l'audio, l'accès au système d'origine, les commandes au volant, la caméra de recul ou l'affichage de stationnement, le Bluetooth, le CarPlay sans fil ou Android Auto, le GPS et le comportement normal de veille/réveil.
Un propriétaire bricoleur expérimenté peut-il installer une unité principale Android W204 ?
Oui, mais il s'agit d'une installation DIY avancée plutôt que d'un simple remplacement d'écran. Les véhicules avec un câblage aftermarket antérieur, des amplificateurs d'origine ou un équipement à fibre optique sont mieux traités avec prudence.
Préparation de l'installation de l'unité principale Android Mercedes W204
La plupart des problèmes d'installation proviennent du forçage des garnitures du tableau de bord, du mélange des connecteurs, du pincement du câblage ou du remontage du tableau de bord avant que toutes les fonctions n'aient été testées.
Outils recommandés
- Outils en plastique pour le retrait des garnitures automobiles
- Tournevis adapté ou tournevis Torx
- Chiffon doux de protection pour les surfaces du tableau de bord
- Lampe torche pour l'inspection des connecteurs
- Attaches de câbles ou ruban de faisceau doux
Avant de retirer quoi que ce soit
- Confirmez qu'il s'agit de la route produit 2011–2014 NTG4.5.
- Disposez l'écran Android, le support, le faisceau principal et les accessoires.
- Ne débranchez pas le câblage multimédia lorsque le système est sous tension.
- Photographiez les emplacements des connecteurs d'origine s'il s'agit de votre première installation sur W204.
- Conservez chaque vis d'origine et clip de garniture groupés par étape de démontage.
Installation de l'unité principale Android Mercedes W204 : Étapes visuelles 14
Suivez la séquence d'installation plutôt que de passer directement au câblage. Chaque étape explique quoi faire, pourquoi c'est important et ce qui doit être vérifié avant de passer à l'étape suivante.
Mettre hors tension le système multimédia d'origine
Que devez-vous faire avant de retirer l'écran d'origine du W204 ?
Éteignez le véhicule et le système multimédia et laissez l'écran d'origine s'arrêter complètement. Protégez le tableau de bord central avec un chiffon doux avant de commencer le retrait des garnitures.
Pourquoi est-ce important ?
Les étapes suivantes exposent le câblage de l'écran, l'unité principale d'origine et les connexions de communication. Débrancher des composants pendant que le système est actif peut créer des pannes électriques inutiles.
Release the Center Air-Vent Panel Carefully
How should the W204 center vent panel be removed?
Use a plastic trim tool and release the retaining clips progressively. Work from one clip position to the next rather than lifting one corner aggressively.
What is the main risk?
Older dashboard plastics may be less flexible. Twisting the panel or using a metal screwdriver can mark the dashboard or crack retaining points.
Remove the Left and Right Decorative Covers
Why are these smaller covers removed first?
These pieces overlap the larger trim route around the factory monitor. Removing them first exposes the next retaining points and reduces the risk of bending the longer trim sections.
How should the clips be handled?
Keep the panel near its normal angle while releasing each clip. Put the left and right pieces aside separately so they return to the correct positions during reassembly.
Release the Main Decorative Strip
What is the safest way to remove the longer trim strip?
Start from the exposed edge and release each retaining point progressively. Support the section that has already come free while working on the next clip.
What should you avoid?
Do not use the released end of the trim as a lever. If one section remains tight, locate the next clip instead of increasing force.
Remove the Right-Side Decorative Trim
Why is this trim section removed separately?
The factory monitor area sits behind overlapping dashboard pieces. Removing the right-side section creates a clean access path without forcing the larger panel.
What should be inspected during removal?
Watch the clip locations. If a retaining clip stays in the dashboard, recover it and reinstall it on the trim before final assembly.
Remove the Upper Trim and Expose the Monitor Mounts
What becomes accessible after this trim section is removed?
The original monitor mounting points become visible. This allows the factory screen to be removed without pulling against surrounding dashboard trim.
Why complete trim removal before touching the monitor?
The factory screen should move directly outward after its fasteners are removed. Remaining overlapping trim can place unnecessary stress on the screen housing.
Remove the Original Monitor Fixing Screws
How should the original W204 monitor be released?
Support the monitor with one hand while removing its fixing screws. Keep the screws together because the replacement bracket may use the original mounting points.
Should the monitor be pulled out immediately?
No. Move it only far enough to access the rear wiring safely. Do not place tension on the LVDS cable or connector housing.
Loosen the Original NTG Head Unit
Why does the original head unit need to move forward?
The Android screen integrates with the existing Mercedes system. Access behind the original NTG unit is required for the matched main harness and vehicle-interface connections.
How far should the factory head unit be removed?
Only far enough to reach the connectors comfortably. Support the unit so its weight does not hang from the factory wiring.
Connect the Factory Power Plug to the Matched Android Harness
How does the main wiring connection work?
Release the original power connector using its locking mechanism and connect it to the matched Android T-harness supplied for the order.
What if a connector does not fit naturally?
Stop. Do not shave plugs, cut factory wires or force a connector into the wrong socket. Check the plug orientation and supplied harness first.
Connect the Original LVDS Signal to the Android Display Route
What does the LVDS connection do?
LVDS carries the factory display signal needed for original Mercedes system access. The original display connection is transferred into the matching Android LVDS or adapter route.
What can cause a black screen or missing original menu?
A partially seated LVDS connector, incorrect socket or improper cable route should be checked first. Align the keyed connector correctly and never force it.
Install the Replacement Screen Bracket and Route the Cables
What matters when fitting the new display bracket?
Position the bracket squarely on the original dashboard mounting points and tighten the fasteners evenly. Make sure no cable sits between the bracket and dashboard.
Where should the additional wiring be placed?
Route the main harness, GPS, 4G, microphone, USB, RCA and audio accessories into available dashboard cavities without pinching or sharply bending them.
Connect and Mount the Android Screen
Should the connections be completed before tightening the new screen?
Yes. Connect the required display, power, LVDS and accessory leads while the rear ports remain visible and easy to reach.
How should the screen be tightened?
Tighten the screen fasteners evenly so the housing sits square to the dashboard. Do not over-tighten small monitor or trim screws.
Power On and Test the System Before Reassembly
Is a successful Android boot enough to finish the installation?
No. A screen can power on while the audio, LVDS, camera or vehicle-interface route is still incomplete. Keep the dashboard open during testing.
What should be tested?
Check Android startup, original Mercedes menu access, sound, steering-wheel controls, Bluetooth, Wireless CarPlay or Android Auto, GPS, reverse camera or parking display, and normal system sleep/wake behavior.
Verify the Final Cable and Accessory Connections
What accessory connections may be included?
The installation set can include the main power harness, GPS antenna, 4G antenna, RCA connections, external microphone, AMI or audio cable and mounting accessories. The exact set depends on the supplied configuration.
Does every unused connector need to be plugged in?
No. Some harnesses contain optional connections for cameras, amplifiers, microphones or other accessories. Secure unused connectors rather than connecting them without a defined purpose.
Mercedes W204 Android Head Unit Installation: Four Connections to Recheck Before Closing the Dash
If the screen powers on but a function is missing, check the related hardware route before changing unrelated software settings.
Confirm the matched T-harness and factory connectors are fully locked.
Recheck the factory display-signal route if the original Mercedes interface is missing.
If there is no sound, check AUX / AMI / USB, amplifier or fiber-optic routing.
Steering-wheel, parking and supported vehicle information depend on the correct vehicle-interface route.
Mercedes W204 Android Head Unit Installation Final Test Checklist
Complete these checks while the factory head unit and wiring remain accessible.
Need the Correct Mercedes W204 Android Head Unit for This Installation?
The iKAGOO Mercedes W204 NTG4.5 Android Head Unit is the product route used for this 2011–2014 C-Class installation. Available configurations include 10.25-inch and 12.3-inch screens with Wireless Apple CarPlay, Android Auto, Bluetooth, WiFi and supported 4G configurations. After the paid order is placed, iKAGOO performs the final engineering verification before shipment so the required screen, harness and connection route can be prepared correctly.
Mercedes W204 Android Head Unit Installation FAQ
Direct answers to the year-range, wiring and installation questions W204 owners commonly need resolved.
What years does this Mercedes W204 Android Head Unit Installation guide support?
This guide specifically covers the Mercedes-Benz C-Class W204 / S204 / C204 2011–2014 NTG4.5 route. It is not the installation guide for the earlier 2008–2010 NTG4.0 version.
Can I install a 12.3-inch Android screen in a 2011–2014 Mercedes W204?
Yes. The current iKAGOO W204 NTG4.5 product route includes 10.25-inch and 12.3-inch screen configurations for the supported 2011–2014 vehicle route.
Will the original Mercedes system still be accessible?
Supported original-system access is retained through the correct power, LVDS and vehicle-interface route. Test original-system switching before dashboard reassembly.
Will steering-wheel controls work after the W204 Android screen installation?
Supported steering-wheel functions are designed to continue working when the matched harness and vehicle interface are correctly connected and configured.
Why does my W204 Android screen have power but no audio?
Power and audio use different paths. Check AUX / AMI / USB routing and any factory amplifier or fiber-optic equipment before changing unrelated settings.
Do I need to cut factory Mercedes wiring?
The intended installation uses a matched plug-in harness without intentionally cutting supported factory wiring. If a connector does not match, stop rather than modifying the factory harness.
Should the dashboard be reassembled immediately after the Android screen turns on?
No. Complete the sound, original-system, steering-wheel, camera, phone-connectivity and sleep/wake checks first.
Where can I get help if a function does not work after installation?
Use your iKAGOO order number together with clear photos or video showing the connector position and exact symptom so the installation route can be checked efficiently.
Mercedes W204 Android Head Unit Installation, Product and Support Resources
Use these pages for the product, earlier W204 versions, installation guidance and iKAGOO order support.
Technical scope: Mercedes-Benz C-Class W204 / S204 / C204, 2011–2014, NTG4.5 Android head-unit route.
Visual procedure: 14 installation reference images covering dashboard access, original head-unit removal, power harness, LVDS, display mounting and final cable identification.
iKAGOO installation principle: use the matched connection route, avoid intentional cutting of supported factory wiring and complete function testing before final reassembly.
Dernière révision : September 2026.
Add comment
Vous devez vous connecter pour publier un commentaire.